The use of laser radiations in clinics that treat vein problems has been on increase. Given all methods of removing unwanted vessels, many patients will prefer the use of laser rays. The use of other techniques like sclerotherapy as well as surgical processes has decreased since this method was approved for application in medical processes around fifteen years ago. If all safety measures are to be observed and good results obtained, then laser vein removal Cincinnati need to be carried out by an accredited professional.
Semiconductor diode lasers are the ones applied for most clinical applications since they emit reliable amounts of light. During the procedure, the device produces high energy pulses in presence of an appropriate skin cooler which are directed to the vessels to be treated. The principle applied in the process is that of selective photothermolysis. The selective nature of oxyhemoglobin to absorb light energy is combined with the suitable pulse durations that correspond to the time of relaxation of the thermal target.
Through research, the suitable beam wavelength to apply in treating vessels which are not wanted has been established. Transmission of light energy to the targeted cells such that they produce heat and deliver it to the epithelium so that the walls of the vein are damaged is achieved if the device is set at this wavelength. At this level of transmission, only little energy will be lost to the melanin found in either skin or hair.
If shorter light wavelength than the standard value is applied, energy will be absorbed by melanin which will result to hair reduction on the area involved which is not the objective. Side effects in the epidermis can be eliminated by applying waves with the suitable characteristics. Applying a wave of low frequency will also ensure that more energy will get to the target cells as there is increased penetration.
The guidelines provided by the manufacturers of laser devices through the medical division should be adhered at time of removal. A cooler is incorporated in the hand piece of the laser applied in this removal. The operator is supposed to switch on the cooling mechanism all the times treatment is going on. By maintaining temperatures of around five degrees Celsius, the skin will not be damaged.
During the treatment process, the hand piece of the laser is supposed to touch the skin gently. It is very important to avoid applying pressure. A slight pressure will be enough to compress the vessel so that the amount of oxyhemoglobin is reduced. This being the target cells, the absorption of energy will then be less effective. Application of a thin layer of ultrasound gel will help reduce the friction between skin and the device.
Laser light has been established as a safe and effective way of eliminating unwanted veins. The method responds better for patients with purple or blue vessels but with it also works with those with red ones so long as the appropriate measures are put in place. Multiple treatments are required for full clearance of spider vessels.
It is painless to have radiation applied on your body surface to do away with veins you do not need. There is no anesthetic is required and the process is undertaken while the patient is awake. Improvement of blood circulation will be noticed as veins with defect valves are eliminated.
Semiconductor diode lasers are the ones applied for most clinical applications since they emit reliable amounts of light. During the procedure, the device produces high energy pulses in presence of an appropriate skin cooler which are directed to the vessels to be treated. The principle applied in the process is that of selective photothermolysis. The selective nature of oxyhemoglobin to absorb light energy is combined with the suitable pulse durations that correspond to the time of relaxation of the thermal target.
Through research, the suitable beam wavelength to apply in treating vessels which are not wanted has been established. Transmission of light energy to the targeted cells such that they produce heat and deliver it to the epithelium so that the walls of the vein are damaged is achieved if the device is set at this wavelength. At this level of transmission, only little energy will be lost to the melanin found in either skin or hair.
If shorter light wavelength than the standard value is applied, energy will be absorbed by melanin which will result to hair reduction on the area involved which is not the objective. Side effects in the epidermis can be eliminated by applying waves with the suitable characteristics. Applying a wave of low frequency will also ensure that more energy will get to the target cells as there is increased penetration.
The guidelines provided by the manufacturers of laser devices through the medical division should be adhered at time of removal. A cooler is incorporated in the hand piece of the laser applied in this removal. The operator is supposed to switch on the cooling mechanism all the times treatment is going on. By maintaining temperatures of around five degrees Celsius, the skin will not be damaged.
During the treatment process, the hand piece of the laser is supposed to touch the skin gently. It is very important to avoid applying pressure. A slight pressure will be enough to compress the vessel so that the amount of oxyhemoglobin is reduced. This being the target cells, the absorption of energy will then be less effective. Application of a thin layer of ultrasound gel will help reduce the friction between skin and the device.
Laser light has been established as a safe and effective way of eliminating unwanted veins. The method responds better for patients with purple or blue vessels but with it also works with those with red ones so long as the appropriate measures are put in place. Multiple treatments are required for full clearance of spider vessels.
It is painless to have radiation applied on your body surface to do away with veins you do not need. There is no anesthetic is required and the process is undertaken while the patient is awake. Improvement of blood circulation will be noticed as veins with defect valves are eliminated.
0 التعليقات: